AEM 50-1200 HIGH FLOW E85 FUEL PUMP UNIVERSAL 340 LPH @ 40 PSI up to 1000 HP

Description

AEM 50-1200 HIGH FLOW E85 FUEL PUMP – 340lph
Hello, thanks for checking out the auction, we appreciate the opportunity to serve you. We want to help make sure you get that project up and going ASAP. We have been taking care of automotive enthusiasts online since 1996, if you need a reputable business to deal with, we are your only choice. Over 100,000+ customers and counting, We know performance ! If you need expert assistance, we can help please free to call, email, or stop by our warehouse if you are near.
We are an
Authorized Master Warehouse Distributor for AEM
, this means you get FULL WARRANTY and FACTORY SUPORT !!
NOTE:
If you find a dealer selling for less we CAN GUARANTEE it has NO WARRANTY or MIGHT BE FAKE, All Authorized dealers are REQUIRED to follow pricing guidelines.
FREE
EXPEDITED 2-3 DAY SHIPPING INCLUDED !!
You are bidding on a BRAND NEW AEM E85 UNIVERSAL IN-TANK FUEL PUMP KIT part number 50-1200. The Kit comes complete with: (1)
fuel pump, (1)rubber sleeve, (2)rubber end caps, (1)pre filter, (1)hose, (2)clamps  and (1)flying lead harness.
AEM’s High Flow E85 In-Tank Fuel Pump is designed for high performance naturally 
aspirated and forced induction EFI vehicles. It delivers reliable 
performance and high volumes of fuel flow for roughly half the cost of 
comparable performance fuel pumps.
The AEM High Flow In-Tank Fuel Pump (PN 52-1000) flows 340 lph at 
40 PSI and is capable of supporting over 1,000 HP.  Click on the 
flow curves and current draw vs. fuel pressure graphs above for more 
information.
AEM High Flow In-Tank Fuel Pump Features:
Designed for high output naturally aspirated 
and forced induction EFI vehicles
In-Tank 
design
Tested to 
flow 340 lph @ 40 PSI
39mm 
diameter fits most applications
Each pump 
individually tested
For 
gasoline vehicles, has been tested to work with ethanol fuels up to E100 and methanol fuels up to M100
TECHNICAL SPECS:
Weight: 10.1oz (285grams)
Outside Diameter: 39mm OD
External Materials: Black plated steel with laser etching
Inlet Fitting: 7.7mm ID, 11.0mm OD
Outlet Fitting: 8 mm hose clamp
PRV Activation: 90 PSI
Impeller Design: Single Scroll Ceramic Turbine
VOLTAGE SPECS:
Connector Terminal: 6 mm Spade (pos/neg)
Min Voltage Input: 6 volts
Max Voltage Input: 18 volts
Current Draw (40 psi): 12 amps (13.5v)
Current Draw (80 psi): 15 amps (13.5v)